หมายเลขประกาศ15139478
POSI-LOCK - Mechanical shaft locks use tapers อุปกรณ์ล็อคเพลาโดยใช้แรงกระทำของ ลิ่ม บนพื้นผิวของTaper เมื่อเราขันน็อตเร่งเข้าไป แรงนี้จะเกิดขึ้นระหว่างพื้นผิวของ เพลา กับ ดุม ของมู่เล่ย์ เฟือง หรืออื่นๆ ทำให้เชื่อมต่อกันเข้าอย่างแนบแน่น
ข้อมูลสินค้า
ประเภทการขายขาย/ให้เช่า/บริการ
สภาพสินค้าใหม่
ราคากรุณาสอบถาม
ข้อมูลผู้ขาย
ชื่อผู้ขายบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
ประเภทผู้ขายร้านค้า/บริษัท
ประเภทสมาชิกสมาชิกที่ส่งหลักฐาน
บัตรประชาชน (M17707) เป็นสมาชิกเมื่อ29 กรกฎาคม 2551 iPagehttps://www.pantipmarket.com/ipage/index.php?ipage_id=3120 หมายเลขโทรศัพท์02-223-2271-3 อีเมลคลิกเพื่อส่งเมล ข้อมูลติดต่อผู้ขาย@namsaewww.facebook.com/namsaefanpagewww.namsae.comnamsae_official ที่อยู่ผู้ลงประกาศกรุงเทพมหานคร » ป้อมปราบศัตรูพ่าย
บัตรประชาชน (M17707) เป็นสมาชิกเมื่อ29 กรกฎาคม 2551 iPagehttps://www.pantipmarket.com/ipage/index.php?ipage_id=3120 หมายเลขโทรศัพท์02-223-2271-3 อีเมลคลิกเพื่อส่งเมล ข้อมูลติดต่อผู้ขาย@namsaewww.facebook.com/namsaefanpagewww.namsae.comnamsae_official ที่อยู่ผู้ลงประกาศกรุงเทพมหานคร » ป้อมปราบศัตรูพ่าย
POSI-LOCK by Miki Pulley – Japan
อุปกรณ์ล็อคเพลาโดยใช้แรงกระทำของ ลิ่ม บนพื้นผิวของTaper เมื่อเราขันน็อตเร่งเข้าไป แรงนี้จะเกิดขึ้นระหว่างพื้นผิวของ เพลา กับ ดุม ของมู่เล่ย์ เฟือง หรืออื่นๆ ทำให้เชื่อมต่อกันเข้าอย่างแนบแน่น
Mechanical shaft locks use tapers
These are mechanical shaft locks that use tapers. The wedging action of the taper surface when the clamping bolt is locked thoroughly couples the shaft and hub. The POSI-LOCK line-up includes the PSL-K (which has a collar and a small inside-to-outside ratio useful in making smaller diameter components), the PSL-G (which is highly compatible with non-Miki products), and the PSL-D (which has a medium-weight design, low surface pressure, and enables smaller and lighter mounts). Each is available in a simple anti-rust specification that uses electroless nickel plating as well as a stainless steel specification.
Application
• Machine tools/
• Pumps/
• Molding machines/
• Printing machines/
• Palletizing robots/
• Tools and jigs
Posilock is divided into 3 categories
1. PSL-K Models
These are mechanical shaft locks that use tapers. Tightening the clamping bolt thoroughly couples the shaft and hub.The wedge effect is augmented by a groove installed in the inner sleeve, allowing high transmission torque to be achieved. There are many variations, including a simple anti-rust type and stainless steel specifications.
Basic Specifications
• Bore diameter : 6 mm to 42 mm
• Max. rated torque : 750 N・m
• Max. rated thrust : 36000 N・m
2. PSL-G Models
These are mechanical shaft locks that use tapers and are highly compatible with equipment from other manufacturers. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 19 mm to 120 mm
• Max. rated torque : 13500 N・m
• Max. rated thrust : 225000 N・m
3. PSL-D Models
These are mechanical shaft locks designed for medium loads that can keep surface pressure low. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 6 mm to 50 mm
• Max. rated torque : 1760 N・m
• Max. rated thrust : 70300 N・m
สนใจติดต่อขอรายละเอียดเพิ่มเติมได้ที่
บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
โทรศัพท์ : 0-2223-2271-3
โทรสาร: 0-2225-5546
อีเมล์ : info@namsae.co.th
เว็บไซต์: http://www.namsae.com
Facebook : http://www.facebook.com/namsaefanpage
Line : @namsae
Instagram : namsae_official
อุปกรณ์ล็อคเพลาโดยใช้แรงกระทำของ ลิ่ม บนพื้นผิวของTaper เมื่อเราขันน็อตเร่งเข้าไป แรงนี้จะเกิดขึ้นระหว่างพื้นผิวของ เพลา กับ ดุม ของมู่เล่ย์ เฟือง หรืออื่นๆ ทำให้เชื่อมต่อกันเข้าอย่างแนบแน่น
Mechanical shaft locks use tapers
These are mechanical shaft locks that use tapers. The wedging action of the taper surface when the clamping bolt is locked thoroughly couples the shaft and hub. The POSI-LOCK line-up includes the PSL-K (which has a collar and a small inside-to-outside ratio useful in making smaller diameter components), the PSL-G (which is highly compatible with non-Miki products), and the PSL-D (which has a medium-weight design, low surface pressure, and enables smaller and lighter mounts). Each is available in a simple anti-rust specification that uses electroless nickel plating as well as a stainless steel specification.
Application
• Machine tools/
• Pumps/
• Molding machines/
• Printing machines/
• Palletizing robots/
• Tools and jigs
Posilock is divided into 3 categories
1. PSL-K Models
These are mechanical shaft locks that use tapers. Tightening the clamping bolt thoroughly couples the shaft and hub.The wedge effect is augmented by a groove installed in the inner sleeve, allowing high transmission torque to be achieved. There are many variations, including a simple anti-rust type and stainless steel specifications.
Basic Specifications
• Bore diameter : 6 mm to 42 mm
• Max. rated torque : 750 N・m
• Max. rated thrust : 36000 N・m
2. PSL-G Models
These are mechanical shaft locks that use tapers and are highly compatible with equipment from other manufacturers. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 19 mm to 120 mm
• Max. rated torque : 13500 N・m
• Max. rated thrust : 225000 N・m
3. PSL-D Models
These are mechanical shaft locks designed for medium loads that can keep surface pressure low. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 6 mm to 50 mm
• Max. rated torque : 1760 N・m
• Max. rated thrust : 70300 N・m
สนใจติดต่อขอรายละเอียดเพิ่มเติมได้ที่
บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
โทรศัพท์ : 0-2223-2271-3
โทรสาร: 0-2225-5546
อีเมล์ : info@namsae.co.th
เว็บไซต์: http://www.namsae.com
Facebook : http://www.facebook.com/namsaefanpage
Line : @namsae
Instagram : namsae_official
ประกาศอื่นของผู้ขาย
รูปภาพรายละเอียดราคา
-
Worm Gear Speed Reducer ยี่ห้อ Makishinko ประเทศญี่ปุ่น
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-2232271-3 Click Emailกรุณาสอบถาม
ID: 113947956 ส.ค. 2567, 11:18:34
-
ข้อต่อไฟฟ้า Mercotac แบบหมุนได้ จำนวน 1 ขั้ว ไซส์มินิ รุ่น 110-T และ 105 คุณภาพชั้นเยี่ยม จาก USA สะอาด เสถียร ติดตั้งง่าย โดดเด่นในการใช้แทนงาน slip ring สำหรับป้อนกระแสไฟฟ้าเพื่อขับเคลื่อนเพลาในแนวราบให้หมุนได้ อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 187198435 ส.ค. 2567, 11:45:59
-
คลัทซ์แม่เหล็กไฟฟ้า รุ่น 101 จาก Miki Pulley ประเทศญี่ปุ่น เชื่อมต่อ หรือ ปล่อย ตัวขับ กับ โหลด ในระบบส่งกำลังได้อย่างมีประสิทธิภาพ ใช้งานได้กว้างขวางในอุตสาหกรรมทุกประเภท อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 176885515 ส.ค. 2567, 11:45:59
-
Datalogic : Photo sensor , Safety sensor สินค้าคุณภาพ นำเข้าจากประเทศอิตาลี
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 159153805 ส.ค. 2567, 11:45:59
-
Webex Vacuum Rolls เป็น Roller ประสิทธิภาพสูงสุด สามารถใช้ได้หลากหลาย
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 155624525 ส.ค. 2567, 11:45:59
-
MAGPOWR - High Efficiency Pneumatic Brake – Model HEB250 เบรคลม ที่บรรจุคุณสมบัติที่มีพลังมหาศาลอยู่ในตัว เป็นเบรคลมในฝันของผู้ผลิต ผู้ใช้ เครื่องจักรเกี่ยวกับการทำกระดาษ กระดาษลูกฟูก เหล็กแผ่น และ อุตสาหกรรมอื่นๆอีกมาก
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด , 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 151222635 ส.ค. 2567, 11:45:59
-
Bevel gears box - Makishinko Brand ตอบสนองความต้องการของลูกค้าได้อย่างสมบูรณ์แบบ ด้วยรูปแบบหลากหลายทีมีให้เลือก และประวัติที่ดีอันยาวนานในการผลิตสินค้าประเภทเกียร์ อีกหนึ่งสินค้าคุณภาพจาก Nitco ผลิตจากประเทศญี่ปุ่น
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 150961735 ส.ค. 2567, 11:45:59
-
IN-LINE TURBO FAN โบล์เวอร์สำหรับดูดกลิ่น ควัน จากงาน บัดกรี อ๊อก เชื่อม ซ่อมแซมแผงวงจรอิเลคโทรนิคส์ และ อากาศเสียในโรงงาน
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 119382285 ส.ค. 2567, 11:45:59
-
SFC หนึ่งใน Servo Coupling ยอดนิยมจาก Miki Pulley ประเทศญี่ปุ่น
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด , 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 113938045 ส.ค. 2567, 11:45:59
-
ปั๊มน้ำหล่อเย็น (Coolant Pump) และ ปั๊มน้ำมัน T-Rotor (T-Rotor Oil Pump) คุณภาพเยี่ยม แบรนด์ A-Ryung จากประเทศเกาหลี สำหรับใช้งานกับเครื่อง CNC ระบบน้ำมัน และ การขนส่งของเหลวในงานอุตสาหกรรมทุกประเภท อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1776696327 ก.ค. 2567, 00:42:49
-
คลัทซ์แม่เหล็กไฟฟ้า รุ่น CS จาก Miki Pulley ประเทศญี่ปุ่น เชื่อมต่อ หรือ ปล่อย ตัวขับ กับ โหลด ในระบบส่งกำลังได้อย่างมีประสิทธิภาพ ใช้งานได้กว้างขวางในอุตสาหกรรมทุกประเภท อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1769809927 ก.ค. 2567, 00:42:49
-
ขอแนะนำผลิตภัณฑ์ใหม่ Vacuum Pump รุ่น Dry Screw VDP-C Series โดย Vacuumize, Vacuum Pumping Solutions จากประเทศเกาหลี
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1660214027 ก.ค. 2567, 00:42:49
-
จำหน่าย WORM GEAR,BRAKE MOTOR,SCREW JACK แบรนด์ "MAKISHINKO" สินค้าคุณภาพจากประเทศญี่ปุ่น
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1563423627 ก.ค. 2567, 00:42:49
-
Tidland Boschert Safety Chucks - USA อุปกรณ์ออกแแบบมาเพื่อช่วยแก้ปัญหาในการติดตั้ง ม้วนวัสดุ เข้ากับเครื่องจักรและส่งผ่าน แรงบิด ในขบวนการผลิตที่ต้องใช้ การม้วนเข้า (Rewind) และ การปล่อยม้วนออก (Unwind)
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1512948027 ก.ค. 2567, 00:42:49
-
"SIKO" Position Indicators เครื่องกำหนดชี้วัดและแสดงค่าตำแหน่งของแกนเพลาบนเครื่องจักรทุกชนิด ผลิตจากประเทศเยอรมนี
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1510197927 ก.ค. 2567, 00:42:49
-
จำหน่าย LFC ชุดควบคุมไฮโดรลิคไฟฟ้า ของ PORA จากประเทศเกาหลี
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1144576627 ก.ค. 2567, 00:42:49
-
จำหน่าย พัดลมระบายอากาศ TA Series พัดลมระบายความร้อนเหมาะสำหรับตู้สวิทช์บอร์ดไฟฟ้า
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด , 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1139472227 ก.ค. 2567, 00:42:49
-
High Temperature Motor มอเตอร์ทนความร้อน พร้อมใบพัด sirocco สำหรับใช้ระบายความร้อน ใน เตาอบ เตาเผา เครื่องทดสอบอุณหภูมิ และ เครื่องจักรที่มีอุณหภูมิสูง อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1944773126 ก.ค. 2567, 18:19:58
-
ข้อต่อไฟฟ้า Mercotac แบบหมุนได้ จำนวน 2 ขั้ว รุ่นยอดนิยม ราคาสบายกระเป๋า โมเดล 230 คุณภาพชั้นเยี่ยม จาก USA สะอาด เสถียร ติดตั้งง่าย ใช้แทนงาน slip ring ในงานอุตสาหกรรมได้อย่างกว้างขวาง อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1932836626 ก.ค. 2567, 18:19:58
-
พัดลม NITCO JUMBO FAN ไซส์ยักษ์ คุณภาพเยี่ยม ส่งลมได้ไกล ประสิทธิภาพการระบายอากาศสูง เหมาะกับการระบายอากาศและความร้อน ในโรงเหล็ก โรงงานทำแก้ว โรงงานกระจก พลาสติก เตาอบ และ สถานที่ที่มีอุณหภูมิสูงหรือควันมาก อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click Emailกรุณาสอบถาม
ID: 1741631326 ก.ค. 2567, 18:19:58