หมายเลขประกาศ15139478
POSI-LOCK - Mechanical shaft locks use tapers อุปกรณ์ล็อคเพลาโดยใช้แรงกระทำของ ลิ่ม บนพื้นผิวของTaper เมื่อเราขันน็อตเร่งเข้าไป แรงนี้จะเกิดขึ้นระหว่างพื้นผิวของ เพลา กับ ดุม ของมู่เล่ย์ เฟือง หรืออื่นๆ ทำให้เชื่อมต่อกันเข้าอย่างแนบแน่น
ข้อมูลสินค้า
ประเภทการขายขาย/ให้เช่า/บริการ
สภาพสินค้าใหม่
ราคากรุณาสอบถาม
ข้อมูลผู้ขาย
ชื่อผู้ขายบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
ประเภทผู้ขายร้านค้า/บริษัท
ประเภทสมาชิกสมาชิกที่ส่งหลักฐาน
บัตรประชาชน (M17707) เป็นสมาชิกเมื่อ29 กรกฎาคม 2551 iPagehttps://www.pantipmarket.com/ipage/index.php?ipage_id=3120 หมายเลขโทรศัพท์02-223-2271-3 อีเมลคลิกเพื่อส่งเมล ข้อมูลติดต่อผู้ขาย@namsaewww.facebook.com/namsaefanpagewww.namsae.comnamsae_official ที่อยู่ผู้ลงประกาศกรุงเทพมหานคร » ป้อมปราบศัตรูพ่าย
บัตรประชาชน (M17707) เป็นสมาชิกเมื่อ29 กรกฎาคม 2551 iPagehttps://www.pantipmarket.com/ipage/index.php?ipage_id=3120 หมายเลขโทรศัพท์02-223-2271-3 อีเมลคลิกเพื่อส่งเมล ข้อมูลติดต่อผู้ขาย@namsaewww.facebook.com/namsaefanpagewww.namsae.comnamsae_official ที่อยู่ผู้ลงประกาศกรุงเทพมหานคร » ป้อมปราบศัตรูพ่าย
POSI-LOCK by Miki Pulley – Japan
อุปกรณ์ล็อคเพลาโดยใช้แรงกระทำของ ลิ่ม บนพื้นผิวของTaper เมื่อเราขันน็อตเร่งเข้าไป แรงนี้จะเกิดขึ้นระหว่างพื้นผิวของ เพลา กับ ดุม ของมู่เล่ย์ เฟือง หรืออื่นๆ ทำให้เชื่อมต่อกันเข้าอย่างแนบแน่น
Mechanical shaft locks use tapers
These are mechanical shaft locks that use tapers. The wedging action of the taper surface when the clamping bolt is locked thoroughly couples the shaft and hub. The POSI-LOCK line-up includes the PSL-K (which has a collar and a small inside-to-outside ratio useful in making smaller diameter components), the PSL-G (which is highly compatible with non-Miki products), and the PSL-D (which has a medium-weight design, low surface pressure, and enables smaller and lighter mounts). Each is available in a simple anti-rust specification that uses electroless nickel plating as well as a stainless steel specification.
Application
• Machine tools/
• Pumps/
• Molding machines/
• Printing machines/
• Palletizing robots/
• Tools and jigs
Posilock is divided into 3 categories
1. PSL-K Models
These are mechanical shaft locks that use tapers. Tightening the clamping bolt thoroughly couples the shaft and hub.The wedge effect is augmented by a groove installed in the inner sleeve, allowing high transmission torque to be achieved. There are many variations, including a simple anti-rust type and stainless steel specifications.
Basic Specifications
• Bore diameter : 6 mm to 42 mm
• Max. rated torque : 750 N・m
• Max. rated thrust : 36000 N・m
2. PSL-G Models
These are mechanical shaft locks that use tapers and are highly compatible with equipment from other manufacturers. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 19 mm to 120 mm
• Max. rated torque : 13500 N・m
• Max. rated thrust : 225000 N・m
3. PSL-D Models
These are mechanical shaft locks designed for medium loads that can keep surface pressure low. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 6 mm to 50 mm
• Max. rated torque : 1760 N・m
• Max. rated thrust : 70300 N・m
สนใจติดต่อขอรายละเอียดเพิ่มเติมได้ที่
บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
โทรศัพท์ : 0-2223-2271-3
โทรสาร: 0-2225-5546
อีเมล์ : info@namsae.co.th
เว็บไซต์: http://www.namsae.com
Facebook : http://www.facebook.com/namsaefanpage
Line : @namsae
Instagram : namsae_official
อุปกรณ์ล็อคเพลาโดยใช้แรงกระทำของ ลิ่ม บนพื้นผิวของTaper เมื่อเราขันน็อตเร่งเข้าไป แรงนี้จะเกิดขึ้นระหว่างพื้นผิวของ เพลา กับ ดุม ของมู่เล่ย์ เฟือง หรืออื่นๆ ทำให้เชื่อมต่อกันเข้าอย่างแนบแน่น
Mechanical shaft locks use tapers
These are mechanical shaft locks that use tapers. The wedging action of the taper surface when the clamping bolt is locked thoroughly couples the shaft and hub. The POSI-LOCK line-up includes the PSL-K (which has a collar and a small inside-to-outside ratio useful in making smaller diameter components), the PSL-G (which is highly compatible with non-Miki products), and the PSL-D (which has a medium-weight design, low surface pressure, and enables smaller and lighter mounts). Each is available in a simple anti-rust specification that uses electroless nickel plating as well as a stainless steel specification.
Application
• Machine tools/
• Pumps/
• Molding machines/
• Printing machines/
• Palletizing robots/
• Tools and jigs
Posilock is divided into 3 categories
1. PSL-K Models
These are mechanical shaft locks that use tapers. Tightening the clamping bolt thoroughly couples the shaft and hub.The wedge effect is augmented by a groove installed in the inner sleeve, allowing high transmission torque to be achieved. There are many variations, including a simple anti-rust type and stainless steel specifications.
Basic Specifications
• Bore diameter : 6 mm to 42 mm
• Max. rated torque : 750 N・m
• Max. rated thrust : 36000 N・m
2. PSL-G Models
These are mechanical shaft locks that use tapers and are highly compatible with equipment from other manufacturers. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 19 mm to 120 mm
• Max. rated torque : 13500 N・m
• Max. rated thrust : 225000 N・m
3. PSL-D Models
These are mechanical shaft locks designed for medium loads that can keep surface pressure low. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 6 mm to 50 mm
• Max. rated torque : 1760 N・m
• Max. rated thrust : 70300 N・m
สนใจติดต่อขอรายละเอียดเพิ่มเติมได้ที่
บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
โทรศัพท์ : 0-2223-2271-3
โทรสาร: 0-2225-5546
อีเมล์ : info@namsae.co.th
เว็บไซต์: http://www.namsae.com
Facebook : http://www.facebook.com/namsaefanpage
Line : @namsae
Instagram : namsae_official
ประกาศอื่นของผู้ขาย
รูปภาพรายละเอียดราคา
-
จำหน่าย SHOWA ปั๊มมือโยก LA Type (Lever Type) ของ Showa เจ้าแห่งระบบน้ำมันหล่อลื่น ประเทศญี่ปุ่น
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1137229014 มิ.ย. 2565, 08:59:09
-
ผงแม่เหล็ก สำหรับ คลัทซ์และเบรคผงแม่เหล็กไฟฟ้า เนื้อละเอียด คุณภาพสูง โดย PORA ผู้ผลิตและผู้เชี่ยวชาญคลัทซ์และเบรคผงแม่เหล็กไฟฟ้า จากประเทศเกาหลี อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1774226713 มิ.ย. 2565, 10:07:32
-
เบรคแม่เหล็กไฟฟ้า รุ่น 111 จาก Miki Pulley ประเทศญี่ปุ่น มีหน้าที่ทำให้ วัตถุที่มีแรงเฉื่อย หรือ วัตถุที่หมุน เคลื่อนตัวช้าลง หรือ หยุด รวมถึง จับยึดชิ้นส่วนต่างๆ ในระบบส่งกำลัง ให้อยู่นิ่ง ได้อย่างมีประสิทธิภาพ ใช้งานได้กว้างขวางในอุตสาหกรรมทุกประเภท
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1771486113 มิ.ย. 2565, 10:07:32
-
พัดลม NITCO JUMBO FAN ไซส์ยักษ์ คุณภาพเยี่ยม ส่งลมได้ไกล ประสิทธิภาพการระบายอากาศสูง เหมาะกับการระบายอากาศและความร้อน ในโรงเหล็ก โรงงานทำแก้ว โรงงานกระจก พลาสติก เตาอบ และ สถานที่ที่มีอุณหภูมิสูงหรือควันมาก อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1741631313 มิ.ย. 2565, 10:07:32
-
Tidland Boschert Safety Chucks - USA อุปกรณ์ออกแแบบมาเพื่อช่วยแก้ปัญหาในการติดตั้ง ม้วนวัสดุ เข้ากับเครื่องจักรและส่งผ่าน แรงบิด ในขบวนการผลิตที่ต้องใช้ การม้วนเข้า (Rewind) และ การปล่อยม้วนออก (Unwind)
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1512948013 มิ.ย. 2565, 10:07:32
-
"SIKO" Position Indicators เครื่องกำหนดชี้วัดและแสดงค่าตำแหน่งของแกนเพลาบนเครื่องจักรทุกชนิด ผลิตจากประเทศเยอรมนี
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1510197913 มิ.ย. 2565, 10:07:32
-
จำหน่าย LFC ชุดควบคุมไฮโดรลิคไฟฟ้า ของ PORA จากประเทศเกาหลี
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1144576613 มิ.ย. 2565, 10:07:32
-
จำหน่าย พัดลมระบายอากาศ TA Series พัดลมระบายความร้อนเหมาะสำหรับตู้สวิทช์บอร์ดไฟฟ้า
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด , 02-223-2271-3 Click EmailกรุณาสอบถามID: 1139472213 มิ.ย. 2565, 10:07:32
-
ข้อต่อไฟฟ้า Mercotac แบบหมุนได้ จำนวน 1 ขั้ว ไซส์มินิ รุ่น 110-T และ 105 คุณภาพชั้นเยี่ยม จาก USA สะอาด เสถียร ติดตั้งง่าย โดดเด่นในการใช้แทนงาน slip ring สำหรับป้อนกระแสไฟฟ้าเพื่อขับเคลื่อนเพลาในแนวราบให้หมุนได้ อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1871984311 มิ.ย. 2565, 08:56:31
-
คลัทซ์แม่เหล็กไฟฟ้า รุ่น 101 จาก Miki Pulley ประเทศญี่ปุ่น เชื่อมต่อ หรือ ปล่อย ตัวขับ กับ โหลด ในระบบส่งกำลังได้อย่างมีประสิทธิภาพ ใช้งานได้กว้างขวางในอุตสาหกรรมทุกประเภท อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1768855111 มิ.ย. 2565, 08:56:31
-
JPV Portable Ventilator พัดลมถังกลมดูดและระบายอากาศ แบบเคลื่อนย้ายได้ อีกหนึ่งผลิตภัณฑ์คุณภาพ จาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1585013411 มิ.ย. 2565, 08:56:31
-
ServoFlex – Metal Disc-spring Coupling - Miki Pulley - Japan ข้อต่อเพลาออกแบบสำหรับ Servo Motor โดยเฉพาะ แม่นยำ แรงเฉื่อยต่ำ ไม่มี Backlash ตอบสนองไว รับแรงบิดได้สูง ทนความร้อนได้ และ ติดตั้งง่าย
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด , 02-223-2271-3 Click EmailกรุณาสอบถามID: 1512496811 มิ.ย. 2565, 08:56:31
-
Rosta - Rubber Spring Tensioners ใช้ตั้ง และ ควบคุมตวามตึง ให้กับ โซ่ สายพาน เครื่องจักร และ อุปกรณ์เครื่องมือเครื่องใช้ต่างๆ สำหรับอุตสาหกรรมทุกชนิด
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด , 02-223-2271-3 Click EmailกรุณาสอบถามID: 1507747111 มิ.ย. 2565, 08:56:31
-
แนะนำ ! บริษัท Elektror ประเทศเยอรมัน เปิดตัว Stainless Steel Blower ป้องกันการกัดกร่อนของ สนิม และ สารเคมี สำหรับอุตสาหกรรม อาหาร ยา การทำความสะอาด และ ขบวนการทางวิศวกรรม
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด , 02-223-2271-3 Click EmailกรุณาสอบถามID: 1372190911 มิ.ย. 2565, 08:56:31
-
บ. น่ำแซอินเตอร์เทรดดิ้ง จก. เป็นตัวแทนจำหน่าย หัวเจาะ “ MIYAKAWA” จากประเทศญี่ปุ่น
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด , 02-223-2271-3 Click EmailกรุณาสอบถามID: 1189997711 มิ.ย. 2565, 08:56:31
-
จำหน่าย LEC LIFTER Electric Hydraulic Controller ของ PORA จากปรเทศเกาหลี
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด , 02-223-2271-3 Click EmailกรุณาสอบถามID: 1144576911 มิ.ย. 2565, 08:56:31
-
Screw Jack คุณภาพดี ผลิตจากประเทศญี่ปุ่น ใช้ในการยกและจับยึดชิ้นงานอย่างมั่นคง ปรับระดับความสูง ความเอียงของชิ้นงานได้ แข็งแรง ทนทาน และ รับ load ได้ดี อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1999790310 มิ.ย. 2565, 13:18:58
-
ETP-E PLUS สุดยอดนวัตกรรมใหม่ล่าสุดที่ทำให้การจับยึดชิ้นงานและแกนเพลาเข้าด้วยกัน สะดวก ประหยัดเวลา และ ไม่ใช่เรื่องยากอีกต่อไป อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1759179810 มิ.ย. 2565, 13:18:58
-
Floatless Switch สวิทช์ควบคุมระดับน้ำอัตโนมัติ เหมาะสำหรับ ตึกแถว บ้านพักที่อยู่อาศัย อพาร์ตเม้นต์ อาคารสำนักงาน และ โรงงานอุตสาหกรรม อีกหนึ่งผลิตภัณฑ์คุณภาพจาก NITCO
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1746516410 มิ.ย. 2565, 13:18:58
-
Dester Plungers คุณภาพดี ใช้งานง่าย ราคาถูก
ติดต่อบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด, 02-223-2271-3 Click EmailกรุณาสอบถามID: 1556527910 มิ.ย. 2565, 13:18:58