15139478 POSI-LOCK - Mechanical shaft locks use tapers อุปกรณ์ล็อคเพลาโดยใช้แรงกระทำของ ลิ่ม บนพื้นผิวของTaper เมื่อเราขันน็อตเร่งเข้าไป แรงนี้จะเกิดขึ้นระหว่างพื้นผิวของ เพลา กับ ดุม ของมู่เล่ย์ เฟือง หรืออื่นๆ ทำให้เชื่อมต่อกันเข้าอย่างแนบแน่น
POSI-LOCK by Miki Pulley – Japan
อุปกรณ์ล็อคเพลาโดยใช้แรงกระทำของ ลิ่ม บนพื้นผิวของTaper เมื่อเราขันน็อตเร่งเข้าไป แรงนี้จะเกิดขึ้นระหว่างพื้นผิวของ เพลา กับ ดุม ของมู่เล่ย์ เฟือง หรืออื่นๆ ทำให้เชื่อมต่อกันเข้าอย่างแนบแน่น
Mechanical shaft locks use tapers
These are mechanical shaft locks that use tapers. The wedging action of the taper surface when the clamping bolt is locked thoroughly couples the shaft and hub. The POSI-LOCK line-up includes the PSL-K (which has a collar and a small inside-to-outside ratio useful in making smaller diameter components), the PSL-G (which is highly compatible with non-Miki products), and the PSL-D (which has a medium-weight design, low surface pressure, and enables smaller and lighter mounts). Each is available in a simple anti-rust specification that uses electroless nickel plating as well as a stainless steel specification.
Application
• Machine tools/
• Pumps/
• Molding machines/
• Printing machines/
• Palletizing robots/
• Tools and jigs
Posilock is divided into 3 categories
1. PSL-K Models
These are mechanical shaft locks that use tapers. Tightening the clamping bolt thoroughly couples the shaft and hub.The wedge effect is augmented by a groove installed in the inner sleeve, allowing high transmission torque to be achieved. There are many variations, including a simple anti-rust type and stainless steel specifications.
Basic Specifications
• Bore diameter : 6 mm to 42 mm
• Max. rated torque : 750 N・m
• Max. rated thrust : 36000 N・m
2. PSL-G Models
These are mechanical shaft locks that use tapers and are highly compatible with equipment from other manufacturers. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 19 mm to 120 mm
• Max. rated torque : 13500 N・m
• Max. rated thrust : 225000 N・m
3. PSL-D Models
These are mechanical shaft locks designed for medium loads that can keep surface pressure low. Tightening the clamping bolt thoroughly couples the shaft and hub.A standard type (steel-specification) and a simple anti-rust specification (electroless nickel plating) are available.
Basic Specifications
• Bore diameter : 6 mm to 50 mm
• Max. rated torque : 1760 N・m
• Max. rated thrust : 70300 N・m
สนใจติดต่อขอรายละเอียดเพิ่มเติมได้ที่
บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
โทรศัพท์ : 0-2223-2271-3
โทรสาร: 0-2225-5546
อีเมล์ : info@namsae.co.th
เว็บไซต์: http://www.namsae.com
Facebook : http://www.facebook.com/namsaefanpage
Line : @namsae
Instagram : namsae_official
ข้อมูลสินค้า
- ประเภทการขายขาย/ให้เช่า/บริการ
- สภาพสินค้าใหม่
- ราคากรุณาสอบถาม
ข้อมูลผู้ขาย
- ชื่อผู้ขายบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
- ประเภทผู้ขายร้านค้า/บริษัท
- ประเภทสมาชิกสมาชิกที่ส่งหลักฐานบัตรประชาชน (M17707)
- เป็นสมาชิกเมื่อ29 กรกฎาคม 2551
- iPagehttps://www.pantipmarket.com/ipage/index.php?ipage_id=3120
- เปิดร้านค้าเมื่อ19 ตุลาคม 2558
- หมายเลขโทรศัพท์02-223-2271-3
- อีเมล
- ข้อมูลติดต่อผู้ขาย
Line : @namsae
Facebook : www.facebook.com/namsaefanpage
Website : www.namsae.com
Instagram : namsae_official
- ที่อยู่ผู้ลงประกาศกรุงเทพมหานคร » ป้อมปราบศัตรูพ่าย
IP ประกาศ
- หมายเลขประกาศ15139478
- ประเภทประกาศStandard Post
- ลงประกาศเพื่อขาย/ให้เช่า/แลก
- ที่อยู่ผู้ลงประกาศกรุงเทพมหานคร » ป้อมปราบศัตรูพ่าย
- IP ที่ลงประกาศ58.11.121.227
- ลงประกาศเมื่อ13 ม.ค. 2558, 07:23:46
- แก้ไขล่าสุดเมื่อ23 ก.พ. 2560, 16:24:10
- เลื่อนตำแหน่งล่าสุดเมื่อ10 เม.ย. 2567, 16:11:59
- โฆษณาแสดงถึงวันที่15 มิ.ย. 2567
- หมายเลขสมาชิกM17707 : namsae
ข้อมูลการส่งสินค้าและการชำระเงิน
- รายละเอียดการส่งสินค้า-
- วิธีการชำระเงิน-
กลับไปที่หน้าประกาศหลัก