*ราคาปกติ 5หมื่นกว่า*
*เหลือเชื่อเปลี่ยนทั้งภาพ เปลี่ยนทั้งเสียง*
*สร้างให้ดีที่สุดด้วยMAGNETICขนาดพิเศษมากถึง10เท่าของรุ่นธรรมดา*
สุดยอดเครื่องคุมไฟHI ENDแท้รุ่นTOPสุดจาก
HIGH FIDELITY CABLES MC-1 PRO POWER CONDITIONER MADE IN USA ใหญ่สุดด้วยแม่เหล็กในตัวถึง10เท่า สภาพเดิมสวยมากเหมือนใหม่ มือเดียวจากห้าง ออกใหม่ 1599 USD *บ้านเรา5หมื่นกว่า*ใช้งานเดิมๆเหมือนใหม่ ขายถูกที่สุดแบบหาไม่ได้อีกแล้วใน3โลกเพียง 18900.-เท่านั้น

The MC-1 Pro uses Magnetic Conduction in a different way from other High Fidelity Cables products. A trickle down from the Pro Elite Power Conditioner it uses aspects of the newly patented capacitor design. HFC couples the power of traditional capacitor filtering with their most powerful magnetic waveguides.

The capacitor itself is too small to filter AC on its own, however, and does not inhibit the flow of energy. However, coupled with the magnetic waveguides the capacitors act to both center electrons within the waveguide as well as draw some energy into and through the waveguide. This new technique makes for a level of magnetic filtering unique to the MC-1 Pro.

The result is lowered distortions sonically it reduces harshness and edginess, it offers greater resolution and better dynamics. The soundstage becomes more focused. Images that have a better, more defined trailing edge will more naturally linger. Tone speed and attack are both improved, and bass frequencies will sound more like instruments and less like boomy or undefined energy. Every aspect of sound is improved by the MC-1 Professional series. Adding additional units helps to continue to even further lower noise, thus the MC-1 Pro is designed to stack. This allows two or more units to be used together in a plug or power strip.

A serious upgrade for a serious system and audiophiles. This unit can also be used with traditional power supply devices like regenerators, isolation transformers, and capacitive-based power conditioners of any type.

MC-1 Pro cannot be used directly in ground fault interrupters or "GFI" receptacles or GFI breakers common in parts of Europe.

All High Fidelity Cables devices work based on lowering distortion and take time to bring the musicality to the end result. When you first install the MC-1 Pro you will hear a reduction of overall sound. This is distortion being removed that had cloned or added itself to the audio signal. Within hours the MC-1 Pro will start to open up and reveal more and more music. Full break-in does not occur until 400 hours or more, and during this time the device should not be removed. If removing to do A/B comparisons, let the system settle for 24 hours before analyzing the sound as the device has a lingering effect. Upon reinstallation, also wait at least 24 hours to evaluate. Some changes are immediate, but the net result of lowing distortion takes time to reveal its benefits, as many audiophiles have learned.

The MC-1 brings a taste of our Professional series line into a category more people may consider. It is not truly at the level of Pro Series cables but it delivers a taste of true high end.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

มีสินค้าเครื่องเสียงHI-ENDเกือบร้อยรายการ รายละเอียดเพิ่มกด
http://noom-hifi.com/webboard/index.php?cat=1&odr=post_id&typ=post&ser=-4554

LINE ID -0830631101
/ 081-433-4554 เอก*ทุกวันศุกร์ไม่สะดวกรับสายครับ*
9.30-17.00น.(นอกเวลาฝากข้อความ)
ส่งmail:kasemwat003@hotmail.com
-บ/ช ธ.กสิกรไทย ซีคอนสแควร์ ออมทรัพย์ NO.071-842507-7 ชื่อ ชนัญชิดา วงศ์นพรัตนบดี
พร้อมรับซื้อ-ขาย-แลกเปลี่ยน-ฝากขายเครื่องเสียงทั่วไปทั้งใหม่-เก่าถึงที่