21961606 Honeywell R4343D1017

Honeywell R4343D1017
Flame current meter jack socket on the front permits monitoring of flame
signal strength, by using any appropriate microampere meter
(0-10uA minimum scale).
Plug-in mounts onto a sub base (included) for surface mounting.
Providing an indication of absense or presence of a flame in intermittent
industrial oil/gas burner applications by an open or closed relay contact.
Approvals: CE approved according EN298 (for intermittent operation)
Protection class: IP40
Ambient temperature: -10...60C
Maximum humidity: 90%rh
R4343D models are for use with rectification type flame sensors, such as
flame rods and C7012A/G UV sensors.
R4343E models are for use with Honeywell UV sensor models C7027,
C7035 and C7044.
Note: The R4343D models will operate also with the "Satronic" IRD820/1020
range of infrared sensors. Note that this combination is NOT CE approved
for use on installations that fall under the GAD (Gas Appliances Directive).
Outputs: 1xDPDT
Operation: Intermit.
Ionisation flame detectors
Flame failure response time: <1s
Flame detector: Rectification
Supply voltage: 220..240 Vac

กลับไปที่หน้าประกาศหลัก