15142091 MIKI PULLEY STARFLEX ข้อต่อเพลาเอนกประสงค์ ด้วยโครงสร้างที่เรียบง่าย แต่เพิ่มค่าแรงบิดเป็นสองเท่า ใช้ Polyurethane Elastomer กันแรงสั่นสะเทือนและแรงกระแทกได้เป็นอย่างดี อีกหนึ่งผลิตภัณฑ์คุณภาพจาก Nitco
MIKI PULLEY STARFLEX - General purpose coupling of simple construction
Double the previous transmission torque (compared to our previous product), a simple jaw coupling
The simple construction of these couplings sandwiches a buffer piece called an element (made of polyurethane elastomer) between two hubs. Elements of two different hardnesses are available so you can select the appropriate one for your torque transmission responsiveness and amount of misalignment. The polyurethane elastomer used in the element enables double the torque transmission of our previous jaw coupling (Miki comparison), and since the design pre-compresses the element, it can also be used without backlash. Aluminum alloy is used as the hub material. The hub may be coupled to the shaft either by key or by clamp.
Features :
• No backlash
• High flexibility
• Easy to mount and remove
• Vibration and impact absorption
• RoHS compliant
StarFlex (ALS) is divided into 3 categories
- ALS R Type
Uses an element (polyurethane elastomer) with a hardness of 97 JIS A and a tight-fit construction designed for a pre-compressed shape, so the coupling can be used without backlash. It can be used at high torque and a wide range of motors, from simple servos to general-purpose motors.
Basic Specifications
• Max. nominal torque : 525 N・m
• Bore ranges : 3 mm to 60 mm
• Operating temperature : -30℃ to 80℃
- ALS Y Type
Uses an element (polyurethane elastomer) with a hardness of 90 JIS A and a tight-fit construction designed for a pre-compressed shape, so the coupling can be used without backlash. Elements are less hard than the ALS-R type, so shaft reaction force can be kept down.
Basic Specifications
• Max. nominal torque : 310 N・m
• Bore ranges : 3 mm to 60 mm
• Operating temperature : -30℃ to 80℃
- ALS B Type
Large misalignments can be absorbed at high transmission torques by using an element (polyurethane elastomer) with a hardness of 97 JIS A, a shape that has a loose-fit construction, and giving the torque transmission surface of the element a crowning shape.
Basic Specifications
• Max. nominal torque : 525 N・m
• Bore ranges : 8 mm to 60 mm
• Operating temperature : -30℃ to 80℃
สนใจติดต่อขอรายละเอียดเพิ่มเติมได้ที่
บริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
โทรศัพท์ : 0-2223-2271-3
โทรสาร: 0-2225-5546
อีเมล์ : info@namsae.co.th
เว็บไซต์: http://www.namsae.com
Facebook : http://www.facebook.com/namsaefanpage
Line : @namsae
Instagram : namsae_official
ข้อมูลสินค้า
- ประเภทการขายขาย/ให้เช่า/บริการ
- สภาพสินค้าใหม่
- ราคากรุณาสอบถาม
ข้อมูลผู้ขาย
- ชื่อผู้ขายบริษัท น่ำแซอินเตอร์เทรดดิ้ง จำกัด
- ประเภทผู้ขายร้านค้า/บริษัท
- ประเภทสมาชิกสมาชิกที่ส่งหลักฐานบัตรประชาชน (M17707)
- เป็นสมาชิกเมื่อ29 กรกฎาคม 2551
- iPagehttps://www.pantipmarket.com/ipage/index.php?ipage_id=3120
- เปิดร้านค้าเมื่อ19 ตุลาคม 2558
- หมายเลขโทรศัพท์02-223-2271-3
- อีเมล
- ข้อมูลติดต่อผู้ขาย
Line : @namsae
Facebook : www.facebook.com/namsaefanpage
Website : www.namsae.com
Instagram : namsae_official
- ที่อยู่ผู้ลงประกาศกรุงเทพมหานคร » ป้อมปราบศัตรูพ่าย
IP ประกาศ
- หมายเลขประกาศ15142091
- ประเภทประกาศStandard Post
- ลงประกาศเพื่อขาย/ให้เช่า/แลก
- ที่อยู่ผู้ลงประกาศกรุงเทพมหานคร » ป้อมปราบศัตรูพ่าย
- IP ที่ลงประกาศ171.97.203.41
- ลงประกาศเมื่อ14 ม.ค. 2558, 08:25:32
- แก้ไขล่าสุดเมื่อ24 มี.ค. 2560, 10:51:55
- เลื่อนตำแหน่งล่าสุดเมื่อ26 มี.ค. 2567, 12:27:06
- โฆษณาแสดงถึงวันที่15 มิ.ย. 2567
- หมายเลขสมาชิกM17707 : namsae
ข้อมูลการส่งสินค้าและการชำระเงิน
- รายละเอียดการส่งสินค้า-
- วิธีการชำระเงิน-
กลับไปที่หน้าประกาศหลัก