Micro Computer Process ControllerTemperature Control เครื่องควบคุม อุณหภูิมิ
จำหน่าย เครื่องควบคุม อุณห ภูิมิ Micro Computer Process Controller Temperature Control automation.in.th
-ควบคุมอุณภูมิ,ความชื้น,แรงดัน,ความดัน,อัตราการไหล,กรดด่าง ฯลฯ
-แสดงตัวเลขแบบ 2 แถวประกอบด้วยตัวเลขแบบ 4 หลัก ซึ่ง แต่ละแถวจะแสดงค่าของ PV และSVง่ายสำหรับการเข้าถึงพารามิเตอร์สำหรับการกำหนดค่าต่างๆ acim.in.th
-รับอินพุท เทอร์โมคัพเปิ้ล ชนิด J,K,R,S,B,E,T,W,PLII,U,L และ อาร์ทีดี ชนิด JPT100,JPT50,PT100 นอกจากจากนี้ยังสามารถ รับ อินพุทเป็นสัญญาณอะนาลอก -10~10,0~10,0~20,0~50,10~50mV,-2~2,-5~5,-10~10,0~1,ACIM0~2,0~5,0~10,1~5,2~10V กระแส 0-20,4~20mA และความต้านทาน 0~5Kohm ได้อีกด้วย
-เอาพุท รีเลย์,มอเตอร์วาวล์, ขับโซลิดเสตทรีเลย์(SSR Drive) ,สัญญาณอะนาลอกแบบ 0~20,4-20mA,0~5,0~10,1~5,2~10V, Control SCR 1,3 phase Zero Cross or Phase angle Control AICM.in.th
-มีรีโมทอินพุทจากสัญญาณ 0~20,4-20mA,0~5,0~10,1~5,2~10V เพื่อเปลี่ยนค่า Sv จากที่ต่างๆ ได้
-มีโหมด Manual เืพื่อจ่ายสัญญาณ Analog Output 0~20,4-20mA,0~5,0~10,1~5,2~10V พร้อมสเกลแสดงผลในแนวนอนเป็นเปอร์เซ็นต์
-โหมด การควบคุมแบบ ON-OFF,PID+FUZZY
-การควบคุมเอาพุทแบบพิเศษ HEAT-COOL ในตัวเดียวกัน ทำให้สามารถ ควบคุมได้อย่างมีประสิทธิภาพ automore
-เอาพุทรีทรานสมิตเตอร์ (Retransmitter) ซึ่งสามารถนำไปใช้ต่อกับเครื่องบันทึกอุณหภูมิ(Recorder),แสดงผล(Panel Meter)ได้โดยง่าย
-โหมดการควบคุมแบบ RAMP/SOAK มี 2 patterns 8 step เหมาะสำหรับเตาเผา กระเบื้องและเซอรามิค เพราะสามารถ ควบคุม และตั้ง ค่าอุณภูมิได้ ตามช่วงเวลาที่ต้องการ เช่น ตั้งอุณภูมิเผาเซอรามิค เป็นแบบขั้นบันได โดยให้สัมพันธ์กับเวลา
-อะลาม 16 แบบ รวมทั้ง อะลามเตือนฮีตเตอร์ขาด HBA (Heater Break Alarm)Automore
-สามารถบันทึกอุณภูมิและ อื่นๆ ได้โดยต่อเข้ากับคอมพิวเตอร์ (Datalogger) ฟรีซอฟแวร์ เชื่อมต่อได้ 30 ตัว ระยะทาง 1200 M.รองรับ RS232/485 MODBUS communicating with HMI Thaimeter.com
FY400 FY600 FY700 FY800 FY900 FY100 FY101
PFY400 PFY600 PFY700 PFY800 PFY900 PFY100 PFY101
TAIE Shihlin MAXTECH MAXTHERMO Gitta J&D Micro-Temp Chromalox ANV Honeywell KCE Golink Reach LinkingTech Pozidon Minsen Digicon
Micro Computer Temperature controller
TAIE Micro ComputerTemperature Controller เครื่องควบคุมอุณหภูมิ
FY100 FY400 FY600 FY700 FY800 FY900
Product Feature by automation.in.th
approval & free power
All models get CE and UL approval.
Operate on any voltage from AC
85~265V at 50/60Hz.
DC 24V is also available (optional
function)
IP65 Proof
IP66(NEMA4) dust & water proof is available for all models(optional
function)
Heater Break Alarm(HBA)
Heater current flowing through CT can be displayed on controller
If heater current is less than HBA set value. AL1will be activated(optional
function)
MODBUS Communcation
FY series suport both MODBUS RTU and MODBUS ASCII protocal.
Communication between controller and HMIa or other equipment is more conveniet(optional function)
Autotuning(AT)
AT Function can calculate the
optimize PID value for your control system,without trying and error
manually.
Auto/Manual mode
Conveniently switched between auto
/manual output mode by clicking
"A/M" key(except"FY400").
Various Indication Lamps
Real time monitor the status of
output (OUT1/OUT2), AT, alarm
(AL1/AL2/AL3), manual output(MAN) and program(PRO)
Bar-Graph
Output percent displayed on the bar-graph in 10 LEDs resolution
(except"FY400").
High Accuracy
Input with 14bit A/D resolution, 0.2% accuracy of FS. Built in "AutoZero-
AutoSpan" function keep good
accuracy.
RAMP & SOAK
Built in 1 segment of RAMP & SOAK function.
Applicable on "SOFT" start condition.
Self-Diagnosis
Continuous checks the input status, RAM status and A/D status. When error was detected, the
corresponding error code will be
displayed on controller so that user can identify the source of trouble
easily.
Data Lock Function
All parameters are seperated in 3 operation levels. Each parameter can be hidden or locked to prevent
unauthorized changes.
(TC)
INPUT Output
(Relay)
Voltage pulse
(SSR drive)
(RTD)
(mA/V)
SCR/TRIAC Trigger
(mA/V/mV)
Motor Valve Control
Remote SV
PLC
Another controller
Input type ：
0~20mA,4~20mA
0~5V,0~10V,2~10V,0~1V
Transmission
Recorder
Display
Signal type ：PV,SV
Output type:
0~20mA,4~20mA
0~5V,0~10V,2~10V,0~1V
Communication-RS485
(RS485 Communication)
Up to 31 controllers
can be connected
Max length 1200M
Communication-TTL
Up to 10 controllers can be connected Max length 1M
The SV vaiue of siave controllers will be remoted by master controller, and
reached to max value at the same time
Ramp/Soak Program
There are 2 patterns by 8 segments can be used in ramp/soak program
There are 2 patterns can be linked togetter as 16 segments i ramp/soak program.
Heationg and Cooling Control
Motor Valve Control
SCR/TRIAC Trigger
■ Control Method ■ Fuzzy
■ Autotuning(AT) ■ Limit Setting
■ Easy Mounting ■ Saving Space
■ Alarm Types ■ Delay Time
■ Hold Function
Use this function can avoid alarm acts
at shart-up.The alarm action is
suppressed at start-up until PV enters
the non-alarm range.
General Description by acim
TAIE single-loop controller introduction
FY series digital controllers are single-loop PID controllers, which are suitable for various industrial process controls. Temperature control is one of the main applications.
PFY series added the “SV RAMP/SOAK programmable” function to FY series, all other functions are the same with FY series.
There are 16 segments of RAMP/SOAK in 2 patterns for programming.
4-digits 8888 LED 7-segment display
The upper display is PV (process value) , and the lower display is SV (set value) display. Input accuracy is ±0.2%
Input sampling time is 250ms Build in Auto-Tuning(AT) function can be used to get optimize PID value automatically.
Board type Digital PID controller
External interface unit -
It allows set and monitor all parameters by key operation manually.
External display unit -
For PV/SV monitoring, prevent unauthorized operation with controller.
Fixed and Plug In wiring terminals type -
It is suitable for different wiring method. acim
General spec introduction
FY/PFY controller can accept various process input, like temperature, humidity, pressure, flow, PH, and various analog linear inputs, like DC 4~20mA, 0~20mA, 0~5V, 0~10V etc.
Temperature control : Available for TC, RTD, Linear(mA / V/mV) sensor input.
TC types can be chosen by front panel key operation. DPT/JPT types can be chosen by front panel key operation.
TC Thermal couple K . J . R . S . B . E . N . T . W . U . L . PL2
RTD Resistance Temperature Device DIN PT100 / JIS PT100
AN Linear DC Input V . mV . mA
Dimension (option)
FY100 175 x 110 mm Board
FY400 48 x 48 mm DIN 1/16
FY600 96 x 48 mm DIN 1/8
FY700 72 x 72 mm DIN 3/16
FY800 48 x 96 mm DIN 1/8
FY900 96 x 96 mm DIN 1/4
Function description Refer to “ Order Information”
Programmable function :
2 sets; each set has 8-section programmable control available. (Option)
Control output function :
Available for 2 sets of control output (HEAT/COOL control)
The standard control output types include Relay, SSR Drive, Linear Output (mA,V).
OUT1 can be used as HEAT control (reverse action) or COOL control (direct action).
OUT1 + OUT2 is suitable for HEAT/COOL control.
Advanced control output include “Three wire motor valve control (Optional).
SCR/TRIC Trigger (Optional).
Control Algorithm :
PID and FUZZY control modes are available through operation board for compatible of different loading.
Alarm output :
Maximum with 3 sets of Alarm output
Totally 17 types of alarm modes for selection.
is also available for heater break detection.
1 unit of CT (Current Transformer) is included in this option.
Heater break alarm (HBA) :
Heater current through CT can be displayed on controller. acim
Using this function to inspect HEATER current and protect HEATER in advance.
Transmission (TRS) output function (Optional) :
TRS output value is correspond to PV or SV display value
Various output type for selection include DC 4~20mA, 0~20mA, 0~5V, 0~10V,1~5V, 2~10V.
It can be used with external temperature recorder or external large display
Remote SV function (Optional):
SV in FY controller can be remote by external analog signal from PLC or other controllers
RS232/RS485 communication function (Optional) :
FY controllers support “Modbus” communication protocol.
It’s easy for using FY controllers to communicate with various HMI and PLC.
RS232 or RS485 communication interface are available by custom selection.
Up to 32 controllers can be connected together in RS485 communication and max wiring length is 1200m.
TTL communication function (Optional):
Up to 10 controllers can be linked together in TTL communication network.
The SV of slave controllers will be remote by master controller and reached to max value at the same time.
Water/ Dust proof function (Optional): automore
Front panel conformed to IP65 Water/Dust proof level. This function had been tested and authorized by third country’s laboratory.
PV Offset function :
The PV offset value can be adjusted by manual setting.
Digital PV Filter function :
It can be applied to adjust PV display time to prevent PV changed rapidly due to external noise.
Data Lock function:
All parameters are separated in 3 operation levels. acim.in.th
Each parameter can be hidden or locked to prevent unauthorized changes.
Other functions:
Output mode can be switched between AUTO and MANUAL mode by front key operation .It is useful for output simulation.
Output percentages displayed on the bar-graph in 10 LED’s resolution.
Data storage in a high reliability EEPROM .
Self-diagnosis function continuously monitors controller internal status and displays corresponding error codes if error status is occurred.
Auto-Zero and Auto-Span function keep good accuracy for long-term use.
Universal power range (AC85~265V , 50/60HZ) .Thus FY controller can be applied in any country around the world
DC24V power is also available (Optional).
Standard Models automation.in.th
Model FY400 FY600 FY700 FY800 FY900
Dimension 48×48mm 96×48mm 72×72mm 48×96mm 96×96mm
Supply voltage AC 85~265V, DC24V(Optional)
Frequency 50/60HZ
Power Consumption approx 3VA approx 4VA approx 3VA approx 4VA approx 4VA
Memory Non-volatile memory E2PROM
Input Measurement input,Sample time : 250ms
TC K, J, R, S, B, E, N, T, W5Re/W26Re, PL2, U, L
RTD PT100, JPT100, JPT50
mA dc 4~20mA, 0~20mA
Voltage dc 0~1V, 0~5V, 0~10V, 1~5V, 2~10V,
-10~10mV, 0~10mV, 0~20mV, 0~50mV,10~50mV
DP Position 0000, 000.0, 00.00 0.000(available for mA or Voltage dc input)
Output 1 Main control output autmore.com
Relay SPST type SPDT type SPDT type SPDT type SPDT type
3A, 220V,electrical life：100，000 times or more(under the rated load)。
Voltage Pulse For SSR drive。ON：20mA。Maximum load current:20mA.
mA dc 4~20mA， 0~20mA。Maximum load resistance:560Ω.
Voltage dc 0~5V， 0~10V， 1~5V， 2~10V。Maximum load current:20mA
Alarm 1 SPST type SPST type SPST type SPDT type SPDT type
3A, 220V,electrical life：100，000times or more(under the rated load)
Control algorithms PID，P， PI， PD， ON/OFF(P=0), FUZZY
PID range P:0~200%, I:0~3600 Secs， D：0~900 Secs
Accuracy 0.2% of FS
Isolation Output terminal (control output,alarm,transmission) and input
terminal are isolated separately
Isolated resistance 10M Ω or more between input terminals and case(ground) at DC 500V
10M Ω or more between output terminals and case(ground) at DC 500V
Dielectric strength 1000V AC for 1 minute between input terminals and case(ground)
1500V AC for 1 minute between output terminals and case(ground) thairelay.com
Operating temperature 0~65℃ / 0~50 ℃
Humidity range 20~90% RH
Weight FY400 approx 150g，FY600 / 700 / 800 approx 225g，FY900 approx 300g
Display Height
PV:7mm SV:7mm
PV:7mm SV:7mm
PV:14mm SV:10mm
PV:7mm SV:7mm
PV:14mm SV:10mm
Model FY400 FY600 FY700 FY800 FY900 acim.in.th
Output 2 For heating and cooling control use.
Relay,SSR,4~20mA,0~20mA ,0~5V,0~10V,1~5V, 2~10V
Output 2 SPST type SPST type SPST type SPST type SPST type
3A , 220V , electrical life:100,000 times or more(under rated
load)
Alarm 3 Not availble available available available available
SPST type SPST type SPST type SPST type
3A , 220V , electrical life: 100,000 times or more(under rated load)
Heater Break Alarm
(HBA) Display range of heater current:0.0~99.9A, Accuracy : 1%FS
Included CT:SC-80-T(5.8 mm dia,0.0~80.0A)
or SC-100-T(12 mm dia,0.0~99.9A)
Alarm relay : AL1
Transmission Available for PV or SV transmission
4~20mA , 0~20mA , 0~1V , 0~5V , 0~10V , 1~5V , 2~10V
Remote SV
4~20mA , 0~20mA , 0~1V , 0~5V , 0~10V , 1~5V , 2~10V
Communication Protocol: MODBUS RTU , MDOBUS ASCII , TAIE
RS232 , RS485 ,TTL
Baud rate: 2400 , 4800 , 9600 , 19200 , 38400 bps
Data bits: 8bit , Stop bit:1 or 2bit, Odd or Even parity
Water/Dust proof IP65
Model FY400 FY600 FY700 FY800 FY900
1φ zero crossing thaimeter.com
control (1φSSR) Available Not available Available Not available Available
3φ zero crossing
control (3φSSR) Available Available
Motor valve control Available
1φ phase angle control (1φSSR) Not a vailable Available
3φ phase angle control
(3φSSR) Not a vailable Available automore.com
Model PFY400 PFY600 PFY700 PFY800 PFY900
Programmable
RAMP/SOAK 2 patterns with 8 segments each.
The 2 patterns can be linked together as 16 segments use.
Panel Introduction
FY400
FY800
FY600
FY700 / FY900
SYMBOL NAME FUNCTION
PV ① Measured value (PV) display Displays PV or various parameter symbols(Red)
SV ② Setting value(SV)display Displays SV or various parameter values(Green)
SET ③ Set key Used for parameter calling up and
set value registration acim.in.th
A/M ④ Auto/manual key Switches between Auto(PID)
output mode and Manual output
＜ ⑤ Shift Key Shift digits when settings are changed
∨ ⑥ Donw Key
(*Program Hold) Decrease numbers
(*Only for programmable controller)
∧ ⑦ Up Key
(*Program Run) Increase numbers
(*Only for programmable controller)
SYMBOL NAME FUNCTION
OUT1 ⑧ OUT1 lamp Lights when OUT1 is on(Green)automore
OUT2 ⑨ OUT2 lamp Lights when OUT2 is on (Green)
AT ⑩ Autotuning lamp Lights when Autotuning is activated (Orange)
AL1 ⑾ Alarm1 lamp Lights when Alarm 1 is activated(Red)
AL2 ⑿ Alarm2 lamp Lights when Alarm 2 is activated(Red)
AL3 ⒀ Alarm3 lamp Lights when Alarm 3 is activated(Red)
MAN ⒁ Manual output lamp Lights when manual output is activated(Orange)
PRO ⒂ *Program Running lamp *Flashes when program running
(Only for programmable controller)
OUT1% ⒃ Output % Bar Graph display
Output % is displayed on 10-dot LEDs
Outline & Opening Dimensions
■ FY400
■ FY600
■ FY700
■ FY800
■ FY900
Outline & Opening Dimensions
■ FY400
■ FY600
■ FY700
■ FY800
■ FY900
Wiring Diagram
■ FY400 ■ FY700 ■ FY600 / 800 ■ FY900
http://temperturecontrol.automore.com
http://taie.automore.com
http://www.thaimeter.com/index.php?lay=show&ac=cat_showcat_by_brand&brand=TAIE
http://www.thaimeter.com/index.php?lay=show&ac=cat_showcat_by_brand&brand=Chromalox
http://www.thaimeter.com/index.php?lay=show&ac=cat_showcat_by_brand&brand=ANV
http://www.thaimeter.com/index.php?lay=show&ac=cat_showcat_by_brand&brand=KCE
http://www.thaimeter.com/index.php?lay=show&ac=cat_showcat_by_brand&brand=Golink
http://www.thaimeter.com/index.php?lay=show&ac=cat_showcat_by_brand&brand=Linking
http://www.thaimeter.com/index.php?lay=show&ac=cat_showcat_by_brand&brand=Digicon
http://www.thaimeter.com/index.php?lay=show&ac=cat_showcat_by_brand&brand=Reach
http://www.thaimeter.com/index.php?lay=show&ac=cat_showcat_by_brand&brand=Micro-Temp
บริษัท ออโตมอร์ จำกัด ๕๑/๘๔๙ หมู่ที่ ๒ ซ.ลำลูกกา๑๓ ถ.ลำลูกกา ต.คูคต อ.ลำลูกกา จ.ปทุมธานี ๑๒๑๓๐
โทรศัพท์ ๐-๒๙๙๕-๕๕๗๑-๒ โทรสาร ๐-๒๙๙๕-๕๕๗๓ มือถือ ๐๘-๖๓๓๘-๖๘๒๓
Automore co.,ltd. 51/849 Moo 2 Soi Lamlukka13, Lamlukka rd., Kukot, Lamlukka, Pathumthani, Thailand 12130
Tel.0-2995-5571-2 Fax. 0-2995-5573 Mobile. 08-6338-6823
http://www.thaimeter.com E-mail: sales@thaimeter.comเลขทะเบียนพาณิชย์อิเล็กทรอนิกส์ เลขที่ 0135550035129
การแสดงความคิดเห็นที่ร้าน Thaimeter.com สามารถแสดงความคิดเห็นได้เฉพาะสมาชิกของ PantipMarket เท่านั้น
ทั้งหมด 0 ความคิดเห็น
