ขาย magnet Hyperion Freference one

MAGNET SYMMETRICAL AMPLIFIER TECHNOLOGY
The Hyperion Reference ONE uses a current feedback topology to ensure low distortion and greater clarity even at the highest levels. Any signal put into The Hyperion Reference ONE will be current amplified in the circuit, amplified with all details intact. Magnet Amplifier employs fully complimentary differential circuit, so the two halves of the amplifier are mirror images of themselves helping lower noise and distortion.
Balanced complimentary push–pull input stage delivers ultra wide bandwidth performance for the best reproduction audio sources.
Ultra-High current output stage deliver instantaneous current for maximum transient impact. The Hyperion Reference ONE provides high peak current delivery, for a realistic music experience.

DUAL MONAURAL
A monaural feature of The Hyperion Reference ONE, which allow them to outperform other amplifiers, is that each channel has its own transformer and power supply. Power amplifiers that share a single power supply across all channels will actually deliver far lower power levels than the maximum power rating when all channels are driven. The Hyperion Reference ONE is designed to support the current delivery for each channel independently.
The Hyperion Reference ONE delivers 400 continuous watts per channel into 4 ohms with all channels (250 watts/channel into 8 ohms). Instantaneous peak exceeds 500 watts into 4 ohms (300 watts/ channel into 8 ohms or 750 watts/ channel into 2 ohms).
You can realize music experience, details, dimensionality and low distortion sound with powerful bass at virtually any power level.

Number of Output Channels 2 Channels Bridgeable
Power output Stereo - 250Wrms @ 8Ω from 20Hz – 20khz all channels driven
Stereo - 400Wrms @ 4Ω from 20Hz – 20khz all channels drive
Bridged - 650Wrms @ 8Ω from 20Hz – 20khz all channels driven
Total harmonic distortion THD+Noise < 0.01% at 1 KHz and < 0.02% at 20 KHz, at rated power 8 Ohms
Frequency response 20 Hz – 20KHz ± 0.1dB
Signal to noise Ratio > 110dB from A-weighted below rated power
Cross talk > 70 dB at 20KHz
Slew Rate 70 V/microsecond
Damping Factor > 600
Input Impedance 25k Unbalanced / 50k Balanced
Input Sensitivity 1.55Vrms for 250W ; 1Vrms for 100W
Signal gain 29 dB
ฺBandwidth 300KHz @ 1W – 8Ω Load
Remote Trigger Input 3 – 30v AC/DC 15mA ± 5mA
Remote Trigger Output 12V DC 100mA
Dimensions Width : 434 mm. Height : 193.5 mm. Depth : 514 mm.
Weight Net Weight : 34 kg Shipping Weight : 40 kg