รูปภาพประกอบทั้งหมด 1 รูป
|
ขาย Paradigm SEISMIC 110 SATIN BLACK 
ลงประกาศเมื่อวันที่ : 07/02/2017
แก้ไขล่าสุด : 07/02/2017
Ref no. 360592
|
|
|
SEISMIC 110 SATIN BLACK Introduction I described the last Paradigm Reference sub I reviewed, the Reference Signature Sub 25, as the “Mother of All Subwoofers”. Then Paradigm came out with the even more massive SUB 1 and SUB 2 models. So when I agreed to review the Seismic 110, a small barrel-shaped sub that measures barely 13″ in any direction, my expectations were set accordingly. I figured this was Paradigm’s version of a genteel sub, one that would produce quality bass without calling undue attention to itself with high SPL’s or deep extension. For this, I owe the folks at Paradigm an apology. I really should have known better. The Seismic 110 is a nasty little beast, capable of producing clean output down to 18 Hz, and filling a room with thunderous bass. Read on for the details. Specifications Design: Sealed Enclosure Driver: One 10″ Polypropylene Amplifier: 850 Watts RMS, 1,700 Watts Peak, Class D Crossover: Variable 35-150 Hz; Defeatable Inputs: RCA Left/Right; XLR Phase: Variable 0-180 degrees Dimensions: 13.5″ H x 11.75″ W x 12.6″ D
SEISMIC 110 SATIN BLACK Introduction I described the last Paradigm Reference sub I reviewed, the Reference Signature Sub 25, as the “Mother of All Subwoofers”. Then Paradigm came out with the even more massive SUB 1 and SUB 2 models. So when I agreed to review the Seismic 110, a small barrel-shaped sub that measures barely 13″ in any direction, my expectations were set accordingly. I figured this was Paradigm’s version of a genteel sub, one that would produce quality bass without calling undue attention to itself with high SPL’s or deep extension. For this, I owe the folks at Paradigm an apology. I really should have known better. The Seismic 110 is a nasty little beast, capable of producing clean output down to 18 Hz, and filling a room with thunderous bass. Read on for the details. Specifications Design: Sealed Enclosure Driver: One 10″ Polypropylene Amplifier: 850 Watts RMS, 1,700 Watts Peak, Class D Crossover: Variable 35-150 Hz; Defeatable Inputs: RCA Left/Right; XLR Phase: Variable 0-180 degrees Dimensions: 13.5″ H x 11.75″ W x 12.6″ D
|
|
|