|
ขาย magnet RHYTHM 
ลงประกาศเมื่อวันที่ : 21/02/2016
แก้ไขล่าสุด : 21/02/2016
Ref no. 337173
|
|
|
Design:2-way 3-units, bass reflex rear ported. Frequency response:45Hz-40kHz Sensitivity:90dB/W/m Impedance:4 ohms (the minimum is 3.2 ohms) Power requirement:50-150W recommended Tweeter:Model:G1. Aluminum ribbon type (the size of aluminum ribbon(LWT):150mm x 14.5mm x 0.01mm),high power handling (100W), high output (102dB/W/m), easily field-replaceable, shielded design. Midwoofer:Model: AC-165S/25CK 6.5"/165mm. NON-WOVEN CARBON FIBER +KEVLAR cone, the voice coil of 1"/25mm copper clad aluminum with flat wire, φ100mmืT20mm +φ100mmืT15mm Y30 ferrite magnet,long throw, shielded design. Crossover frequency:2300Hz Crossover attenuation slope:woofer-12dB,tweeter-18dB. Crossover parts:M-Cap Supreme MKP series capacitors are used for the crossover of tweeter, Aurum Cantus metallic polypropylene capacitors are used for the crossover of woofer, 5N OFC inductor and metal oxide film resistor.
Design:2-way 3-units, bass reflex rear ported. Frequency response:45Hz-40kHz Sensitivity:90dB/W/m Impedance:4 ohms (the minimum is 3.2 ohms) Power requirement:50-150W recommended Tweeter:Model:G1. Aluminum ribbon type (the size of aluminum ribbon(LWT):150mm x 14.5mm x 0.01mm),high power handling (100W), high output (102dB/W/m), easily field-replaceable, shielded design. Midwoofer:Model: AC-165S/25CK 6.5"/165mm. NON-WOVEN CARBON FIBER +KEVLAR cone, the voice coil of 1"/25mm copper clad aluminum with flat wire, φ100mmืT20mm +φ100mmืT15mm Y30 ferrite magnet,long throw, shielded design. Crossover frequency:2300Hz Crossover attenuation slope:woofer-12dB,tweeter-18dB. Crossover parts:M-Cap Supreme MKP series capacitors are used for the crossover of tweeter, Aurum Cantus metallic polypropylene capacitors are used for the crossover of woofer, 5N OFC inductor and metal oxide film resistor.
|
|
|