เครื่องมือวัดองศา MSD001
Digital Angle Gauge Meter Protractor 360°C
Description
This inclinometer (angle measuring device) can be used to measure angles within ±180° (0 ~ 360°) range in wide variety of applications. You can simply place the meter on a reference surface zero, then it will give a result of measured angle within 0.1° accuracy.
The built-in strong disk magnets on the bottom can firmly attach the meter to the surface you are going to measure, so that you can easily and quickly set the bevel angle. The reading is always displayed as upright. This meter works great for miter and table saws, detailed applications are listed as follows.
Applications
Drainage angles and run-off slopes
Tool setting on Lathes
Setting blade angle of Circular Saws
Setting blade angle of Miter Saws
Setting work piece angle for milling
Grader and tractor work alignment
Platform monitoring
Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table
Detail
Small and portable design
Fast and accurate measurement
Degree and Percentage of slope in conversion
Measuring range of 4 x 90° with ±0.1° repeatability
Large and clear LCD display with 0.1° resolution
Hold Measured data
Calibrate button to calibrate the meter to any reference surface
Three built-in magnets on the base can attach any magnetic surfaces
The unit will directly enter the state of absolute angle measurement every time be turned on (No matter change the batteries)
Absolute and relative measurement conversion
Measuring Range: 4 x 90°
Resolution: 0.1°
Repeatability: ±0.1°
Operating Temperature: 0 ~ 40 °C
Operating Humidity: 40 ~ 80%
Power: 3 x 3V CR2032 Batteries (included)
Dimensions: approx. 51 (L) x 51 (W) x 27 (D) mm (2.01' x 2.01' x 1.06' inch)
Weight: 122 g (batteries included)
การแสดงความคิดเห็นที่ร้าน บริษัท โปรโทรนิกส์ อินเตอร์เทรด จำกัด สามารถแสดงความคิดเห็นได้เฉพาะสมาชิกของ PantipMarket เท่านั้น
ทั้งหมด 0 ความคิดเห็น
