ติดต่อสอบถามเพิ่มเติม คุณบัญชา 086-323-4925, 087-563-8543
เว็บไซด์ : www.ichoose4cons.com
Email : ichoose4cons@gmail.com

Name: ROOFMATETM SL-X Extruded Polystyrene Foam Specification Number: 000000074516
Previous Specified Material: 00119234 Additional Product Information:
Board faces:
Edge treatment:
Application:
Trade product code: 74516
THE DOW CHEMICAL COMPANY SALES SPECIFICATION
with skin
Ship Lap on all four sides
roof insulation
Fire Classification Note
The national fire performance test standards and regulations may differ from country to country. In parallel there is the European fire classification which applies in those EU countries where the European fire classification system has already been adopted.
Customers are kindly asked to contact the responsible DOW Sales Office to obtain more details.
Government and Industry Standards
XPS - EN 13164 - T1 - CS(10Y)300 - CC(2/1,5/50)110 - DS(70,90) - DLT(2)5 - <50mm: WD(V)3 / >=50mm & - <80mm: WD(V)2 / >80mm: WD(V)1 - WL(T)0,7 - FTCD1 - MU150
PAGE 1
Test and Test Condition
Thickness Tolerance, for thicknesses <50mm
Thickness Tolerance, for thicknesses >=50mm <=120mm
Thickness Tolerance, for thicknesses >120mm
and
Final Testing Requirements
Limit Unit Method Note
-2—2 mm EN 823
-2—3 mm EN 823
-2—8 mm EN 823 -3—3 mm EN 822
Width Tolerance
® TM Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow
Name:
Specification Number: Effective Date:
Test and Test Condition
Length Tolerance
Squareness, ends
Flatness, in width and length, for lengths <1000mm
Flatness, in width and length, for lengths >=1000mm and <=2000mm
Flatness, in width and length, for lengths >2000mm and <=4000mm
Flatness, in width and length, for lengths >4000mm
Compressive Modulus, vertical
Compressive Strength, vertical
Long Term Load, 50 Y, <2% Deformation
RCS 90Days, (French Regulation Requirement)
DS 90Days, (French Regulation Requirement)
Declared Thermal Conductivity, for thicknesses <=70mm
Declared Thermal Conductivity, for thicknesses >70mm and <=120mm
Limit
-6 — 6 5 Max 7 Max
14 Max
21 Max
28 Max
12 Aim 300 Min 110 Aim
180 Aim 0.8 — 2.0 29 Max 29 Max
Unit Method Note
mm EN 822 mm/m EN 824 mm EN 825
mm EN 825
mm EN 825
mm EN 825
MPa EN 826 kPa EN 826 kPa EN 1606
kPa NFP 75-401-1 % NFP 75-401-1 mW/m.K EN 13164 mW/m.K EN 13164
THE DOW CHEMICAL COMPANY SALES SPECIFICATION
ROOFMATETM SL-X Extruded Polystyrene Foam 000000074516
2013-06-11
Final Testing Requirements
PAGE 2

Name:
Specification Number: Effective Date:
Test and Test Condition
Declared Thermal Conductivity, for thicknesses <=100mm
Declared Thermal Conductivity, for thicknesses >100mm and <=120mm
Declared Thermal Conductivity, for thicknesses >120mm
Density, typical
Water Absorption, by diffusion, WD/V/3
Water Absorption, aft freeze-thaw cycles
Water Absorption, by immersion
Fire Performance, Reaction to Fire, Euroclass E
Fire Performance, Germany, B1 Rating
Fire Performance, Switzerland, 5.1 Rating
Deformation, (under spec. compr. load and temp), DLT(2)5
Compressive Creep, at 50C; load 10kPa; thickness 30-60mm, SC1a2Ch
Compressive Creep, at 50C; load 10kPa; thickness 70-100mm, SC1a4Ch
Limit
29 Max 29 Max
31 Max
Report Pass
1 Max
0.5 Max Pass
Pass Pass Pass Pass
Pass
Unit
mW/m.K mW/m.K
mW/m.K kg/m3
% %
Method Note
EN 13164 EN 13164
EN 13164
EN 1602 1
EN13164/EN1208 8
EN 12091
EN 12087 EN 13501-1
DIN 4102 Part 1
SIA 183
EN 1605
NFP 61-203 2
NFP 61-203 3

ติดต่อสอบถามเพิ่มเติม คุณบัญชา 086-323-4925, 087-563-8543
เว็บไซด์ : www.ichoose4cons.com
Email : ichoose4cons@gmail.com