ขาย สารกรองน้ำเรซิ่น RESIN IOL LC701สารกรองน้ำเรซิ่น ราคาถูกที่สุดลิตรละ 38

สารกรองน้ำเรซิ่น ถูกที่สุด ลิตรละ 38 บาท

เรซิ่น กรองน้ำ/resin

IOL LC701 is a high purity, high capacity, gel type
sulphonate polystyrene cation exchange resin
supplied in the sodium form as moist, tough, uniform
spherical beads. IOL LC701 is intended for use in all
water softening, deionization and preparation of pure
water. IOL LC701 is in compliance with the U.S. Food
and Drugs Code of Federal Regulations section 21
paragraph 173.25
Appearance
Palm yellow spherical
beads
Polymer Matrix Structure Styrene - DVB
Type Gel strong acid
Functional Group R—(SO3)-M+
Ionic Form Na+
Moisture Content 45 – 50 %
Capacity in Volume ≥ 1.9 meq/ml min
Shipping Weight 0.77– 0.87 g/ml
Density 1.25– 1.29 g/ml
Particle Size Range (0.315
– 1.250 mm)
≥ 95 %
Effective Particle Size
Range
0.40 – 0.60 mm
Uniformity Coefficient ≤ 1.60
Swelling (Na+→H+) ≤ 10 %
Sphericity ≥ 90 %
Screen Size Range
0.315mm to 1.25mm;
50-16 mesh
PRESSURE DROP
The graph shows the expected pressure loss per foot
of bed depth as a function of flow rate, at various
temperatures.
* 1 m/h equals 0.41 gpm/sq.ft
BACKWASH
After each cycle the resin bed should be backwashed
at a rate that expands the bed 25 to 50 percent. This
will remove any foreign matter and reclassify the bed.
The graph above shows the expansion characteristics
of IOL LC701 in the sodium form.
LC701
STRONG ACID CATION EXCHANGE RESIN
PHYSICAL & CHEMICAL PROPERTIES
HYDRAULIC PROPER

pH Range 0 - 14
Temperature ≤ 120 0C (For Na Form)
≤ 100 0C (For H Form)
Minimum Bed Depth 0.6 m
Regenerant Concentration 8 – 12 % (For NaCl)
5 % (For HCl)
Regenerant Flow Rate 4 – 5 m/h (For NaCl)
3 – 5 m/hr (For HCl)
Regenerant Contact Time ≥ 30 min
Displacement Rinse Rate 4 – 5 m/h (For NaCl)
3 – 5 m/h (For HCl)
Displacement Rinse Time ≥ 30 min
Fast Rinse Rate 15 – 30 m/h
Fast Rinse Time 10 – 30 min
Service Flow Rate 15 – 30 m/h
DEMINERALIZATION
IOL LC701 can be used in multiple and mixed bed
demineralizers with strongly basic anion
exchangers such as IOL LA703, LA153, LA203.
SOFTENING
IOL LC701 is ideally suited for industrial softening
applications because of its high capacity and good
physical stability.
* For potable water applications, the resin must be properly
pre-treated, usually by multiple exhaustion and regeneration
cycles, to insure compliance with extractable levels.
PE lined with plastic bag. Net weight: 25 litres (21
kg.) / Bag