Spec FullHigh-definition 1080p wide angle camera 4X digital zoom Inbuilt with microphone Supports the function of video while charging Supports high-capacity T-Flash Card Fill-in lamp camera function Supports moving detection photogaraph function Product Specs: 1. Sensing element:COMS Wafer 2. Lens:Wide angle,140° 3. Focus range:12cm-infinite 4. Screen:2.7”LTOS TFT LCD 5. Picture:1M,3M,5M,8M 6. Video format:AVI 7. Shutter:Electronic 8. Connector:USB2.0 9. Battery:400mAh 10. Dimensions:77x300x11mm Accessories: 1User manual 1USB cable 1*USB charger(built-in 12V to 5V adapter)
Attention: 1. Please insert the TF card to the DVR before recording. 2. Please supply the power by the USB car charger, the car charger has the adapter that transfer 12V to 5V; if the output voltage is more than 5V, the DVR will be burned down. I.Car Camera Feature Diagram 1.Display Screen 2. Page Up 3. Page Down 4. Power On/Off/Menu 5. Mode 6. OK
7. Phone Answer Key / Power On/Off 8. Bluetooth Indicator 9. On-Board Indicator 10. Speaker 11. Fastener 12. TV Out 13. Reset 14. USB Port 15. TF Card Slot 16. Camera II. Features & Operations Installation: This digital video camera is easy to install. Just open the fastener and buckle it onto your rearview mirror,then connect the car charger to the cigarette lighter and the USB port to the camera. And the wires could be hidden in the car. Charging: A. by connecting it to the on-board USB charger B. by connecting it to the power cord: the camera automatically starts recording when the car is started, and it automatically turns off and saves the video file recorded when its power is cut off for 15 second. (Note: Use only on-board power supply with an output of 5V/1A.) 3. Recording Mode: The camera automatically enters recording mode when you press (On/Off) or connect it to the on-board USB charger. (Please insert TF card first) and files are automatically saved to the TF card. The blue indicator light goes off when you unplug the on-board USB charger or press (On/Off) to turn the camera off. 4. Sound Recording Sound recording is enabled by default. Press and hold for 2 seconds if you want to disable it . 5. Playback Mode Press after video recording stops to enter playback mode. Press (or) to select the video recorded before or after and then press OK to play. 6. Protection Feature Protection feature serves to protect and lock a certain video or all videos so that they won’t be recorded over during loop recording. 7. One-Key Lock Press OK to lock the video being recorded so that it won’t be recorded over during loop recording. Press to unlock it and returns to loop recording mode. 8. Browsing through files to be deleted Turn the camera on and press (Video Recording) to stop it from recording, then press to enter “Playback Mode”. Press (Page Up) to select the files recorded and press OK (Play) for preview. It you want a delete a certain file, press Key 4 (Menu) to enter “Delete Mode” when preview finishes. Press (Page Down) to select “Delete” or “Format”. Then continue by pressing (Menu) to exit. 9.Feature Setup Turn the camera on and stop it from recording. Then press Key 4 (Menu) to enter “Setup Page”. Press to select specific parameters and press OK in the end to confirm your selection. When you are done with all the settings, press Key 4 (Menu) to exit “Setup page”.